Submersible Electric Motors
- Power: 1/3 HP to 3 HP options
- Voltage: 115V / 230V Single-Phase
- Material: 304 Stainless Steel Housing
- Rating: Continuous Duty UL 778 / CSA
US Engineered · B2B Component Supply
Motors, Electronics & Propellers
Heavy-Duty Submersible Motors, Precision Marine Propellers & NEMA-Rated Electrical Controls Built for Commercial Water Aeration Systems.
OEM Quality Standards
Industrial Grade Aeration Components Built for Global Operations
For over 60 years, Scott Aerator has engineered commercial-grade water management hardware designed for continuous operation in challenging freshwater and saltwater environments.
Our comprehensive selection of submersible electric motors, dynamic hydro-propellers, digital scheduling controllers, and weatherproof sub-panels empowers water management contractors, engineering distributors, and municipal buyers with reliable, direct-from-factory replacements.
UL & CSA Certified
Submersible motors engineered with 304 stainless steel housings, meeting ANSI/NSF 61 and UL 778 safety standards.
NEMA 3R Controls
Outdoor load centers and digital timing switches designed for harsh, moisture-heavy commercial installations.
Hydro-Pitched Props
Thermoplastic and stainless steel blade geometries optimized for maximum fluid displacement and low energy draw.
Direct OEM Support
Complete product documentation, technical sizing guides, and international shipping logistics support.
Product Catalog
Commercial Motors, Controls & Hardware Components
Explore our certified product range engineered for fountain operations, surface aeration, de-icing, and sediment management.
Scott Outdoor Sub-Panel
- Rating: 100 Amp Commercial Center
- Capacity: 8-Space, 16-Circuit Bus
- Enclosure: Weatherproof NEMA 3R
- Listing: UL Commercial / Residential
WiFi Smart Time Controller
- Control: 7-Day Wireless Scheduling
- Capacity: Up to 96 ON/OFF Events Daily
- Channels: Dual Independent Circuit Control
- Enclosure: Lockable Rainproof Housing
Intermatic Dual Timing Center
- Voltage: Dual 115V / 230V Compatible
- Design: Two Timers in One Steel Enclosure
- Applications: Aerator & Lighting Systems
- Rating: Heavy-Duty Industrial Duty
Intermatic 115V Residential Timer
- Voltage: 115 Volt GFCI Compatible
- Operation: Plug-in Mechanical Timer
- Enclosure: Weatherproof Protective Cover
- Function: Automated Energy Savings
Intermatic 115V Commercial Timer
- Series: Proven T100 Mechanical Switch
- Load Capacity: Up to 40 Amps per Pole
- Schedules: Up to 12 ON/OFF Cycles Daily
- Housing: Rugged NEMA 1 Steel Case
Intermatic 230V Residential Timer
- Voltage: Auto-Voltage Detection (110–277 VAC)
- Rating: Heavy-Duty 40-Amp Design
- Mounting: Outdoor Weatherproof Box
- Feature: Self-Lubricating Gear Train
Intermatic 230V Commercial Timer
- Target: Commercial Fountains & De-Icers
- Switching: DPST Heavy-Duty Mechanism
- Enclosure: Heavy-Duty Outdoor Enclosure
- Durability: Industrial Continuous Operation
In-Line De-Icer Thermostat
- Threshold: Factory-Set Activation at 30°F
- Voltage: 115V and 230V Configurations
- Function: Automatic Freeze Protection
- Efficiency: Reduces Winter Energy Consumption
AquaSweep® / De-Icer Propeller
- Compatibility: All AquaSweep & De-Icer Models
- Size: 5-Inch High-Efficiency Pitch
- Mounting: Quick Set-Screw Shaft Sleeve
- Material: Impact-Resistant Engineered Resin
DA-20 Propeller Assembly
- Application: Display Aerator DA-20 Series
- Sizing: 1/3 HP to 3 HP Models
- Assembly: Precision Balanced Hub & Blades
- Performance: Maximum Water Volume Transfer
North Star Propeller Assembly
- Application: North Star Fountain Aerators
- Sizing: 1/3 HP up to 3 HP Range
- Design: High-Velocity Aeration Stream
- Build: Non-Corrosive Heavy-Duty Hub
Boilermaker Propeller Assembly
- Application: Boilermaker Surface Aerators
- Sizing: 1/2 HP through 3 HP Options
- Hydro-Design: High Oxygen Dissolution Output
- Fixing: Stainless Set-Screw Fastening
Submersible Wire Splice Kit
- Variants: Motor (3-Wire), Oscillator, RGB & Light
- Waterproofing: Heat-Shrink Waterproof Resin
- Application: Cable Extensions & Motor Repairs
- Durability: Submerged Continuous Pressure Rating
Commercial Nylon Mooring Line
- Dimensions: 5/16-inch Braided Nylon (35' & 50')
- Target: Floating Fountains, Aerators & De-Icers
- Property: UV & Rot-Resistant Marine Weave
- Strength: Commercial Tensile Load Rating
Engineering Specifications
Component Selection Guide for B2B Procurement
Reference parameters for international distributors, OEM assemblers, and maintenance contractors.
| Component Category | Engineering Specs | Compliance & Material | Primary Application |
|---|---|---|---|
| Submersible Motors | 1/3 HP – 3 HP | 115V / 230V 60Hz (50Hz compatible) | 304 Stainless Steel, UL 778, CSA, NSF 61 | Fountains, Surface Aerators, De-Icers |
| Outdoor Sub-Panels | 100 Amp Main Lug | 8-Space, 16-Circuit Bus Bar | NEMA 3R Rainproof Weatherproof Enclosure | Centralized Commercial Power Distribution |
| WiFi Smart Controllers | 7-Day Wireless Scheduling | 96 ON/OFF Daily Cycles | Dual-Circuit Outdoor Rated Housing | Automated Fountain & Lighting Timers |
| Mechanical Timing Centers | 115V / 230V | 40-Amp per Pole Load Capacity | NEMA 1 & NEMA 3R Steel Enclosures | Heavy-Duty Commercial Duty Cycling |
| Marine Hydro-Propellers | 5-Inch & Custom Pitched Geometries | Impact-Resistant Thermoplastic & Stainless Sleeve | AquaSweep, DA-20, North Star, Boilermaker |
| Submersible Wire Splices | 3-Wire Motor / Oscillator & 5-Wire RGB Light Kits | Adhesive-Lined Heat Shrink Submerged Tubing | Underwater Cable Repair & Extension |
Technical Support
Frequently Asked Questions for Overseas Importers
Are Scott Aerator replacement motors compatible with international power grids?
Yes, our submersible electric motors are manufactured for global industrial deployment. Standard models run on single-phase 115V and 230V power supply. Our engineering department supports B2B buyers in verifying electrical compatibility for specific regional frequency and voltage standard requirements.
What international safety standards do your components meet?
All Scott Aerator electric motors feature UL 778 recognition, CSA certification, and compliance with ANSI/NSF 61 standards for clean water contact. Electrical control boxes, sub-panels, and timing centers meet standard NEMA 3R commercial weatherproof ratings.
How do I specify the correct replacement propeller for my system?
Propellers are carefully calibrated to motor horsepower and operating RPM to ensure optimal hydraulic displacement without causing motor amp draw overload. We supply specific matched assemblies for AquaSweep®, DA-20, North Star, and Boilermaker lines ranging from 1/3 HP up to 3 HP.
What are the freight lead times for export orders?
Standard replacement motors, propellers, and electrical controls dispatch from our Holland, Michigan facility within three business days. Bulk wholesale orders are packed for ocean or air freight with complete commercial documentation.
